Oyster Quartz Split Face Tiles 350x180 From £32.99/m2

Oyster Quartz Split Face Cladding Tiles 350 x 180 combine cream, beige, brown, golden yellow, soft grey and subtle green tones in a naturally varied quartz stone surface. Rather than presenting one dominant colour, the stone creates a distinctive multicolour finish, with each piece contributing different mineral markings, textures and natural tonal variation.

The 350 x 180 mm format is particularly distinctive because it combines stone pieces of different lengths, widths and approximately 10–20 mm thicknesses. Larger blocks are mixed with narrower strips, while individual pieces project at different depths. This creates a strongly defined, staggered 3D structure with visible shadow lines and a much more pronounced layered appearance than conventional uniform split face tiles.

The combination of irregular proportions, projecting stone faces and varied natural colours gives Oyster Quartz considerable visual depth. Cream and pale stone pieces brighten the surface, while brown, yellow, grey and occasional green tones create contrast. The finished wall therefore changes subtly with viewing angle and natural or artificial light, making the texture particularly noticeable.

Oyster Quartz Split Face Cladding Tiles are suitable for feature walls, fireplace surrounds, entrance walls, garden walls and decorative exterior cladding where a highly textured natural stone finish is required. The strongly staggered surface is particularly effective on larger wall areas where the different depths and stone sizes can be viewed together.

Explore our wider Split Face Tiles 350 x 180 collection for other natural stone colours and finishes using the same mixed-size, staggered 3D format.

Oyster Quartz is a naturally multicoloured stone. Cream, beige, brown, yellow, grey and subtle green tones will vary between individual pieces, together with differences in mineral pattern, texture and surface projection. This natural variation is an important part of its distinctive layered appearance.

We wholesale reliable supply to long-term builders and landscapers at competitive trade prices.

Split Face Tiles Features

• Interlocking design so you can create a "seamless" join so the wall looks natural
• Can be used inside and outside (ensure the area is tanked if direct water contact is likely)
• Suits modern and traditional schemes
• Easy to install and quick - no specialist tools needed
• Recommended to apply a sealant for enhanced protection when using these tiles on water or shower walls
• Sample service available to check colour and texture so you can be confident of your purchase

We Recommend Cement-Based C2TE S1 Flexible Tile Adhesive

Not sure whether you need heavy natural stone cladding or thinner split face tiles? Read our expert guide, Stone Cladding vs Split Face Tiles, before you buy.

Split Face Tiles – Considerations Before Buying: Why Minor Visible Adhesive Is Normal in Split-Face Tiles

Why Are Our Split Face Tile Prices So Competitive?

Our split face tiles are supplied directly from our overseas group factory, reducing traditional distribution costs and keeping prices close to the source. Our pricing approach is based on reasonable margins rather than high mark-ups, supporting competitive pricing while maintaining consistent product quality and reliable supply.

Can Split Face Tiles Be Used Outdoors?

Yes, many natural stone split face tiles are suitable for indoor and outdoor wall applications when installed correctly. For exterior use, the wall must be strong, stable and properly prepared, with a suitable exterior-grade flexible adhesive. The top and exposed edges should also be detailed to prevent water from penetrating behind the tiles, particularly in UK rain and frost conditions.

Where Can Split Face Tiles Be Used?

Split face tiles can be used in both outdoor and indoor applications. Externally, they are commonly installed on garden walls, exterior feature walls, façades and entrance areas where the substrate and wall construction are suitable.

Internally, they are suitable for living-room feature walls, hallways, kitchens, fireplace surrounds and selected bathroom feature walls. They are not normally recommended inside enclosed shower areas or other locations exposed to constant direct water because their uneven surface and close-jointed construction make waterproofing and cleaning more difficult.

Do Split Face Tiles Need Sealing?

For exterior split face tile installations, sealing is generally recommended. Outdoor natural stone is exposed to rain, frost, dirt, algae and regular weather changes, so a breathable natural stone sealer can help reduce water absorption and make the surface easier to maintain.

For interior use, sealing depends on the location. It is recommended in kitchens, bathroom feature areas, fireplace surrounds and other places exposed to moisture, staining or soot. In living rooms, bedrooms, hallways and other dry interior spaces, sealing is usually optional rather than essential.

Always test the sealer on a small area first. Choose a breathable natural stone sealer that maintains the natural appearance of the stone rather than leaving a dark, glossy or coated finish.

What Surface Should Split Face Tiles Be Installed On?

Split face tiles should be installed on a strong, stable, clean and suitable substrate capable of supporting the weight of natural stone. Common suitable surfaces include concrete, brickwork, blockwork, sound cement render and suitable cement-based tile backer boards. Weak plaster, loose render, painted surfaces and unsupported standard plasterboard should not be tiled directly without appropriate preparation or reinforcement. For a full step-by-step guide, please refer to How to Correctly Install Split Face Tiles.